FCDP_Realtime   Version 3.32, Compiled Dec  9 2016 16:15:05
FPGA reports FW Version 7.04

;Start date, time YYMMDD_hhmmss = 
170822_192411
;Start time since Epoch: Seconds 
1503429851
;MicroSeconds 
37395

Config Option 00 (cfg): bin1 is 184
Config Option 01 (cfg): bin2 is 552
Config Option 02 (cfg): bin3 is 999
Config Option 03 (cfg): bin4 is 1523
Config Option 04 (cfg): bin5 is 2233
Config Option 05 (cfg): bin6 is 3174
Config Option 06 (cfg): bin7 is 4254
Config Option 07 (cfg): bin8 is 5471
Config Option 08 (cfg): bin9 is 6827
Config Option 09 (cfg): bin10 is 8321
Config Option 10 (cfg): bin11 is 10383
Config Option 11 (cfg): bin12 is 18026
Config Option 12 (cfg): bin13 is 18410
Config Option 13 (cfg): bin14 is 18833
Config Option 14 (cfg): bin15 is 19294
Config Option 15 (cfg): bin16 is 19795
Config Option 16 (cfg): bin17 is 20334
Config Option 17 (cfg): bin18 is 20912
Config Option 18 (cfg): bin19 is 21636
Config Option 19 (cfg): bin20 is 22528
Config Option 20 (cfg): siggainthrsh is 1000
Config Option 21 (cfg): sigbase is 400
Config Option 22 (cfg): sigbaselow is 240
Config Option 23 (cfg): stream_sub_sample is 100
Config Option 24 (cfg): stream_mode is 0
Config Option 25 (cfg): qual_mult is 1
Config Option 26 (cfg): sig_mult is 2.000000
Config Option 27 (cfg): qual_type is 2
Config Option 28 (cfg): heater_enable is 255
Config Option 29 (cfg): ht_armtx_1 is 7200
Config Option 30 (cfg): ht_armrx_2 is 7200
Config Option 31 (cfg): ht_window_3 is 7200
Config Option 32 (cfg): ht_strut_4 is 7200
Config Option 33 (cfg): ht_crossbar_5 is 7200
Config Option 34 (cfg): ht_laser_6 is 9000
Config Option 35 (cfg): ht_elec_7 is 7900
Config Option 36 (cfg): subsample_clk is 0
Config Option 37 (cfg): destination_ip is 192.168.0.255
Config Option 38 (cfg): destination_port is 0
Config Option 39 (cfg): source_ip is 0.0.0.0
Config Option 40 (cfg): source_port is 0
Config Option 41 (cfg): time_field is 1
Config Option 42 (cfg): tas_field is 5
Config Option 43 (cfg): extra_field is 0
Config Option 44 (cfg): probe_type is FFSSP-100
Config Option 45 (cfg): beam_diameter is 200
Config Option 46 (cfg): slit_width is 200
Config Option 47 (cfg): rejection_aperture_diameter is 200
Config Option 48 (cfg): depth_of_field is 200.0
Config Option 49 (cfg): sig_to_qual is 2.1
Config Option 50 (def): gain_factor is 8
Config Option 51 (cfg): debug_config is 0

// -----------Non-System Parms found in Config File -----------
 3.859 4.423 5.13 6.001 33.229]
 IP address
BEAM_SPLITTER_RATIO=50.50
PROBE_SERIAL_NUMBER=SN07
NON_SYS_PARM1=2300
NON_SYS_PARM2=STRING
NON_SYS_PARM3=3.1415
DATE_LAST_Sizing_CALIBRATION=12/02/2016
CONFIG_FILE=FCDP_FSSP_SN07_20170113

// --------END OF Non-System Parms found in Config File -------
1503429851 76227 Resetting the baseline
1503429851 85115 Failed peak data write
1503429851 85115 Failed peak data write
1503429851 85115 Failed peak data write
1503429851 85115 Failed peak data write
1503432267 991711 Resetting the baseline
1503432441 149034 Resetting the baseline
1503432562 654692 User quit the program