FCDP_Realtime   Version 3.32, Compiled Dec  9 2016 16:15:05
FPGA reports FW Version 7.04

;Start date, time YYMMDD_hhmmss = 
170813_220847
;Start time since Epoch: Seconds 
1502662127
;MicroSeconds 
7565

Config Option 00 (cfg): bin1 is 184
Config Option 01 (cfg): bin2 is 552
Config Option 02 (cfg): bin3 is 999
Config Option 03 (cfg): bin4 is 1523
Config Option 04 (cfg): bin5 is 2233
Config Option 05 (cfg): bin6 is 3174
Config Option 06 (cfg): bin7 is 4254
Config Option 07 (cfg): bin8 is 5471
Config Option 08 (cfg): bin9 is 6827
Config Option 09 (cfg): bin10 is 8321
Config Option 10 (cfg): bin11 is 10383
Config Option 11 (cfg): bin12 is 18026
Config Option 12 (cfg): bin13 is 18410
Config Option 13 (cfg): bin14 is 18833
Config Option 14 (cfg): bin15 is 19294
Config Option 15 (cfg): bin16 is 19795
Config Option 16 (cfg): bin17 is 20334
Config Option 17 (cfg): bin18 is 20912
Config Option 18 (cfg): bin19 is 21636
Config Option 19 (cfg): bin20 is 22528
Config Option 20 (cfg): siggainthrsh is 1000
Config Option 21 (cfg): sigbase is 400
Config Option 22 (cfg): sigbaselow is 240
Config Option 23 (cfg): stream_sub_sample is 100
Config Option 24 (cfg): stream_mode is 0
Config Option 25 (cfg): qual_mult is 1
Config Option 26 (cfg): sig_mult is 2.000000
Config Option 27 (cfg): qual_type is 2
Config Option 28 (cfg): heater_enable is 255
Config Option 29 (cfg): ht_armtx_1 is 7200
Config Option 30 (cfg): ht_armrx_2 is 7200
Config Option 31 (cfg): ht_window_3 is 7200
Config Option 32 (cfg): ht_strut_4 is 7200
Config Option 33 (cfg): ht_crossbar_5 is 7200
Config Option 34 (cfg): ht_laser_6 is 9000
Config Option 35 (cfg): ht_elec_7 is 7900
Config Option 36 (cfg): subsample_clk is 0
Config Option 37 (cfg): destination_ip is 192.168.0.255
Config Option 38 (cfg): destination_port is 0
Config Option 39 (cfg): source_ip is 0.0.0.0
Config Option 40 (cfg): source_port is 0
Config Option 41 (cfg): time_field is 1
Config Option 42 (cfg): tas_field is 5
Config Option 43 (cfg): extra_field is 0
Config Option 44 (cfg): probe_type is FFSSP-100
Config Option 45 (cfg): beam_diameter is 200
Config Option 46 (cfg): slit_width is 200
Config Option 47 (cfg): rejection_aperture_diameter is 200
Config Option 48 (cfg): depth_of_field is 200.0
Config Option 49 (cfg): sig_to_qual is 2.1
Config Option 50 (def): gain_factor is 8
Config Option 51 (cfg): debug_config is 0

// -----------Non-System Parms found in Config File -----------
 3.859 4.423 5.13 6.001 33.229]
 IP address
BEAM_SPLITTER_RATIO=50.50
PROBE_SERIAL_NUMBER=SN07
NON_SYS_PARM1=2300
NON_SYS_PARM2=STRING
NON_SYS_PARM3=3.1415
DATE_LAST_Sizing_CALIBRATION=12/02/2016
CONFIG_FILE=FCDP_FSSP_SN07_20170113

// --------END OF Non-System Parms found in Config File -------
1502662127 49044 Resetting the baseline
1502668916 974972 User quit the program